need help with a GAS BOILER | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss need help with a GAS BOILER in the Boilers area at Plumbers Forums

Status
Not open for further replies.
M

mark_mc

icon1.png
What gas boiler would you recomend


i am pricing a job in dublin at the minute, im not carrying out the gas work going to get a gas safe person to carry out the gas work and commission but i have a few questions

i am not gas safe registered as i stated, but can i pipe the boiler connections to the central heating, hang the boiler and put the flue out etc, and leave the rest for the gas man? ( all the gas pipework and commissioning?

i have to get the gas boiler its going to a system boiler just doing a the central heating and a unvented cylinder upstairs.(have my unvented ticket)
what boiler will i get because i dont want to get rubbish and then no-one will do the gas work for me ( reccomend make and i will size according)

or would a combi gas do, its for a house which will have an ensuite and a main bathroom and a downstairs toilet 2showers no baths or will a combi even be enough if it is what combi would you reccomend??

thanks guys​
 
Cant hang boiler, cant do flue but can drill flue hole lol , no gas pipe work ,can take flow,return ,hot colds near boiler etc .
Work out how many kilowatts of heating you need to judge what type boiler you need .
 
thanks for the info, would you think a combi would be ok to supply

2 showers
3 wash hand basins
1 kicthen sink
 
thats what i thought, im not experience with gas boiler;s does it come with a pressure vessel in it for the heating? and is the boiler just controlled with a simple 2 channel programmer if i wanted to fit 2 motorised valves.
 
thats what i thought, im not experience with gas boiler;s does it come with a pressure vessel in it for the heating? YES AND A PUMP and is the boiler just controlled with a simple 2 channel programmer if i wanted to fit 2 motorised valves.YES
 
thats brillant gas man, could you reccomend a good system boiler to me, dont want to purchase one that no one wants to install, like an (ideal) heard they are not great.

so all i need is to take two pipe to it flow and return and there is a pump in the boiler and auto bypass>


+ a mains for the quick fill?
 
baxi duotec system or potterton gold system basically the same boilers
 
ok baxi duo tec then, any one else any opinions on boilers worth a looking
 
have you thought about a conventional boiler with all your controls external??
You can install a combi as long as its flow rate is good enough
 
Combi would manage what you require but as said above needs to be a decent flow rate, valliant for me are the best going, but all installers have there personal prefferances.
 
a system boiler seems to be a good job with all built in an handy to pipe up. now maybe a silly question.
i will have two myson 2 ports one doing heating and one doing hw only, will have a separte 2 channel programmer like a horstmann or something is that ok to be wired with most gas boilers or do you have to use there controls on the boiler or there add on controls.
i too used to oil boilers
 
looking at a ecoTEC Plus 624 vaillant it as the btu i require
any experience of this boiler?
 
Repaired an Eco Tec today. They're not bad boilers, in my opinion, not my favourite though.
 
can you get a two channel programmer with the eco tec
Vaillant Ecotec Switch 140 2Channel Progammer

seen that on that heat and plumb website could i use that with two motorised valves instead of getting a separte timeclock
 
Status
Not open for further replies.

Similar plumbing topics

Hi, approx. 2-3 hours.
Replies
2
Views
657
I feel for you, it's a bad position to be in...
Replies
18
Views
2K
T
I know you must be frustrated, but as gmartine...
Replies
4
Views
472
Is it bottles or bulk tank? They go over pipe...
Replies
2
Views
840
Back
Top