Need some guidance on new flush plate | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Need some guidance on new flush plate in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
J

James Nicholls

Hi, I want to replace the flush plate on my toilet. The concealed cistern says "fastpart conceala" on the front and has a yellow cable coming out of the top to the existing plate, so I guess it is pneumatic.

What do I need to look for in a new flush plate? I have looked at some plates which imply that you can only use them with the manufacturer's make of cistern. Can't imagine this is always the case though.

Help / guidance much appreciated.
 
Thanks Shaun, is it the case then that there are no generic ones out there? Each manufacturer is different?
 
Thanks Shaun, is it the case then that there are no generic ones out there? Each manufacturer is different?

yes i would say unless your replacing the flushing valve try and get the same
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Thank you - that's helpful. Have emailed them...
Replies
4
Views
848
  • Question
Hi. Sorry for your problem. If there are no...
Replies
10
Views
2K
N
Dual Flush is a water-saving design for a...
Replies
3
Views
2K
  • Question
After 10yrs I would replace both the fill...
Replies
1
Views
1K
When you say 'cleaned the bottom of the tank'...
Replies
4
Views
1K
Back
Top