New April 92% ErP boilers | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss New April 92% ErP boilers in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
90
Npower have said they would fit a Ideal logic C30 combi boiler for my daughter under the energy saving improvement plan. Does this boiler comply with the new April directive of 92% ErP and is this boiler any good.
 
Thanks Harvest, does this mean it does not comply with the new ErP and should not be fitted
 
I believe so but as I said before I could be wrong. But my understanding is that it needs to be 92% without controls.
 
I thought the controls/ weather comp / fghr upped the percentage
 
Thinking back to the erp labels ( I didn't do many)
You added all the bits together and got a combined figure
 
91.1% my understanding is adding suitable controls raises it to the required efficiency of 92% level Gross just looked on installer connect it says says as below ?. kop

Screenshot_2018-04-26-06-32-28.png


Screenshot_2018-04-26-06-32-33.png
 
I’m sure that I saw somewhere that you couldn’t use controls to bring the ERP up. I will look into it but also just saw this. So what does this mean

9B644BA9-F88E-446B-ADA2-0055D2EA08E7.jpeg


It says homeowners must then select not including
 
Just remember it is only the space heating element of the boiler that needs to be 92%

You HAVE to look in the boilers MI’s at the ERP data, it will give you the space heating seasonal efficiency figure, which is the figure we need to be 92% or above.

The Logic Combi range has 94% space heating seasonal efficiency.

All manufacturers will be ensuring boilers are upto this level as standard. You won’t fond that many that aren’t already.

You will be fine with the C30 it’s a good boiler.

See below for highlighted figure from MI’s

2205829A-C7FD-4123-81AC-5E4CFED4CE6C.jpeg
 
Status
Not open for further replies.

Similar plumbing topics

Thanks to @ShaunCorbs and @cjg for the helpful...
Replies
7
Views
842
Hi Chris, Are there any specialists in east...
Replies
4
Views
810
If you turn it off completely you will have no...
Replies
7
Views
1K
The boiler is reading heat exchanger temp No...
Replies
3
Views
1K
L
Re: Rads. I would turn off all the rads on...
Replies
15
Views
1K
Back
Top