New Combi Boiler - Powerflush vs Chemical Flush | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss New Combi Boiler - Powerflush vs Chemical Flush in the Boilers area at Plumbers Forums

Status
Not open for further replies.
A

alltec

I'm going to get a new Combi-Boiler installed, but the installer (which I must use as its under a government scheme) has said they will only Chemical Flush the system, not Power Flush before installation.
Would this be sufficient? And would this cause warranty problems - I was looking to get a boiler with as big a warranty as possible (7 or 10 years).
Thanks for advice.
 
when the install is done get a local Gsr or Plumber to come round, power flush the system and sort out any shoddy work that often comes with government funded schemes
 
There is no simple answer. The system may be clean enough that a chemical flush would suffice, or it may need more. Manufacturers require the system to be flushed but I don't know of any that specify powerflushing over chemical or even just a mains flush. British Standards also don't specify the method.

You're getting a free boiler and installation, be thankful for that!
 
Power flushing a combi boiler in unnecessary. Why go to all the bother of connecting a pump up when you've got a connection for mains water straight into the system.
 
Power flushing a combi boiler in unnecessary. Why go to all the bother of connecting a pump up when you've got a connection for mains water straight into the system.

My mains dosnt run at 500lpm?? But I'm a fan of mains flushing
 
mains flush can work well, but it wont move what a powerflush machine will. whats needed depends on the system. The answer cant be guessed without taking a look at the system and its condition.
 
Thanks for the advice, I'll talk with the installer when he comes and may get someone to check out the install afterwards to correct anything / flush if necessary. Not that its relevant to my question, but it should cost nothing - maybe a little for extra pipework to relocate the boiler position etc.
 
His whole install will cost nothing. You won't get a choice of boiler. Just be happy you won't have the bill
 
Status
Not open for further replies.

Similar plumbing topics

Hi appreciate and thanks to all that replied...
Replies
11
Views
1K
System boilers have a pressurised heating...
Replies
1
Views
274
I took @Chuck to mean: A reputable...
Replies
5
Views
1K
There is 6 pipes under the boiler and one goes...
Replies
19
Views
1K
Back
Top