New combi please help advise | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss New combi please help advise in the UK Plumbers Forums area at Plumbers Forums

Messages
6
Hello I am looking to put new combi boiler in , had a few quotes for different boilers any thoughts on which you think is the best to fit viessmann vitodens 100w or ideal logik 30kw or Worcester ? Been looking at different reviews & that & they all seem to have good points & bad points , I think I am going towards the viessmann but any help & advise would be great thanks in advance
 
Hello I am looking to put new combi boiler in , had a few quotes for different boilers any thoughts on which you think is the best to fit viessmann vitodens 100w or ideal logik 30kw or Worcester ? Been looking at different reviews & that & they all seem to have good points & bad points , I think I am going towards the viessmann but any help & advise would be great thanks in advance
The 3 you mention are good as is Vaillant. The main criteria you ought to look at is guarantee and installer...use a manufacturer accredited installer to get long guarantee. You need to consider if you should have a system flush chemical protection and magnetic and non magnetic filter. Chking
 
The 3 you mention are good as is Vaillant. The main criteria you ought to look at is guarantee and installer...use a manufacturer accredited installer to get long guarantee. You need to consider if you should have a system flush chemical protection and magnetic and non magnetic filter. Chking
Hi thanks for that getting a quote from plumber who fits valliant boilers on Friday whom I got off valliant website as an accredited fitter who lives near me , thanks for that
 
We normally end up recommending that you choose the installer first and then discuss which boiler is the best fit to your requirements with them.

Domestic heating should be thought of as a system and updating needs to start with a heat loss calculation. Even the nicest boiler can be hopeless as part of the wrong system or if the installation isn't done right. A relatively cheap or older model properly installed work can be all that's needed.
 

Similar plumbing topics

  • Question
I would have either but I prefer the weather...
Replies
4
Views
3K
  • Question
Is there much in it between the pros and...
Replies
4
Views
1K
  • Question
Just buy a tap from a reputable supplier /...
Replies
3
Views
922
  • Question
you probably sorted this by now, but as a leak...
Replies
11
Views
2K
  • Question
Take it back to the shop.
Replies
3
Views
766
Back
Top