New digital 7 day programmer for potterton flamingo. | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss New digital 7 day programmer for potterton flamingo. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
S

Steffan

Hi there,

I have a Potterton Flamingo 40 (gravity fed system) and it has an old fashioned one day programmer with the clockwork wheel and movable segments to set the on and off times, I want to replace it with a 7 day programmer or 5/2 day one so i can have it set differently at the weekend. Potterton make some ( EP3002 EP6002), will I be able to swap my old one for one of these with the existing wiring?

Thanks in advance for your help.

Steffan
 
No problen .any programmer will meet you requirements

when you put hot water on all you are doing is sending power to boiler and when you put heating on you are sending power to pump via room thermostat

as you know you can not have heating without hot water

most programmers will have a switch on the back for this setting :)


ps just because you have a potterton boiler,does not mean you have to stick with a potterton programmer

Some of the life style range are very user friendly for operation and setting
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

Replies
14
Views
1K
Finally got an update from him. He cant do the...
Replies
2
Views
834
  • Locked
Hi bongolia. I mean if it's a flat on ground...
Replies
2
Views
3K
  • Question
Hm. I don't think I read the instructions...
Replies
5
Views
2K
Programmer. Thanks for the helpful replies...
Replies
14
Views
251
Back
Top