Looking to replace a faucet with spray hose in a small commercial kitchen. we did have one installed by a plumber a while ago but in all honesty it seemed like a piece of chinese crap off of Amazon. Very similar to the American T&S model. It leaked like hell and after only a couple of months the brass plungers inside the taps were becoming rough and sticking and a few of the washers just cracked and fell apart.
Ok, so a couple of questions. We do not mind spending up to £200 for a unit but £300-£400 is out of the question. Can anybody supply a link as to where we might be able to source something and preferably UK? A brand that spare washers or any other parts if needed would be useful as well. lastly the distance between the surface mounted feeds is seven inches from centre to centre, is that a standard distance or will they all vary? Thanks for any info.
Ok, so a couple of questions. We do not mind spending up to £200 for a unit but £300-£400 is out of the question. Can anybody supply a link as to where we might be able to source something and preferably UK? A brand that spare washers or any other parts if needed would be useful as well. lastly the distance between the surface mounted feeds is seven inches from centre to centre, is that a standard distance or will they all vary? Thanks for any info.
