Nice bit of ingenuity here... | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Nice bit of ingenuity here... in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,168
Can you see what's wrong with the picture...

20180223_152319.jpg


20180223_152620.jpg
 
Mupvc ?
 
If you had only given it s glance you may have missed it

Maybe they cut the plume kit too short and had to use something else
 
If you had only given it s glance you may have missed it

Maybe they cut the plume kit too short and had to use something else


That's what I initially thought but the kit shouldn't be cut down as is. Needs to be 500mm length hey.
 
Status
Not open for further replies.

Similar plumbing topics

  • Sticky
  • Article
I know a while ago that there was an issue...
Replies
0
Views
2K
  • Article
I'm still struggling to finalise on the actual...
Replies
0
Views
179
Or elec bills as it would be running...
Replies
9
Views
699
  • Question
Great, thanks. Much appreciated.
Replies
6
Views
541
It might be, if it can't be rectified by...
Replies
6
Views
547
Back
Top