N
nabs2007
NO Central Heating and NO Hot Water
The setup in our house consists of a programmable timer/control next to boiler in kitchen, then room thermostat in living room. Then upstairs there is a wiring box cylinder and pump with i mid position valve. There is no live feed goin to the wiring box, the only thing that is recieving any live feed is the timer/programmer in kitchen, however this is not sending any signal to the wiring box i.e. hot water call or heating call. Does anyone have any suggestions as to the nature of the fault could it be the programmer, i have recently changed both the pump and the mid positoin valve wiring these in exactly the same way the existing items were.
Kind Regards Neil
The setup in our house consists of a programmable timer/control next to boiler in kitchen, then room thermostat in living room. Then upstairs there is a wiring box cylinder and pump with i mid position valve. There is no live feed goin to the wiring box, the only thing that is recieving any live feed is the timer/programmer in kitchen, however this is not sending any signal to the wiring box i.e. hot water call or heating call. Does anyone have any suggestions as to the nature of the fault could it be the programmer, i have recently changed both the pump and the mid positoin valve wiring these in exactly the same way the existing items were.
Kind Regards Neil
Last edited by a moderator: