K
knarf
I have a Greenstar 28i Junior condenser boiler. A service engineer came around to safety check this Last Thursday, he immediately stated that the pressure was low and increased this to 1/1.5 bar.
On Friday I turning on the Central heating the pressure clock/register goes up to around 5, on release of water from the radiator tap it decreases to around 3 bar, but there is no hot water despite the radiators being hot.
When I turn the Central heating off, the hot water supply is ok . Could this be a faulty Diverter Motor?
On Friday I turning on the Central heating the pressure clock/register goes up to around 5, on release of water from the radiator tap it decreases to around 3 bar, but there is no hot water despite the radiators being hot.
When I turn the Central heating off, the hot water supply is ok . Could this be a faulty Diverter Motor?