No hot water - Oil fired boiler

[HPPH]

Can anyone help please? I have no hot water and the oil fired boiler is not firing up ( programmer as normal )
There is a white box on the wall ( House sitting for Dad ) called a watchman flashing a 'c' at me. Does this mean I have run out of oil?

 

[dontknowitall]

According to their website:

"This indicates that damage may have ocurred
to your Watchman transmitter and it has an
internal fault. A replacement product will be​

required, please contact Sensor Systems"

Unless, of course the right hand part of the 0 has stopped working then it will look like a C!!

I'd start by ignoring this and checking the level of oil in the tank.

 

[Puddle]

yeh,probably your dad is using the oil money for holiday money !!

not worried about the poor house sitter !!

 

[HPPH]

Thanks for advice dontknowitall. Will check manually. Thanks again

Yeah probably. Have starting feeding the back up hotwater stove with a variety of kitchen furniture ....?!!

 

[Dotty]

Switch off the watchman and unscrew the battery off the sender at the tank. Wait 2 mins, turn it back on and then screw the battery back in.

 

[HPPH]

Thanks Croppie. Will try that now. Cheers

Hi Croppie, I have tried as suggested and now stopped flashing and reads an ' f '. Possibly means ' Fault ' although the transmittor seems to work still ( noise ).
Will call Watchman direct unless any other anyone has any other ideas?

Thanks again

Now back to flashing ' C '! - will call sensor systems