Noken arquitect toilet

[Spudhater]

not got a clue how to plumb in with the adapter/isovalve MI are usless..

Any ideas..

 

[Spudhater]

Trip to porcelanosa on friday then for me ..

 

[turnpin]

reminds me of that toyah wilcox song "it`s a mystery" good luck to you!regards turnpin

 

[Spudhater]

You wait to see the bath !!! its like a boiled egg cut in half long ways..... took four of us to get up stairs

 

[Toddyplumb]

I think that might be a dry wall filling kit . Valve head sticks out through wall ( I think your photo shows valve head, its a bit blurred) the rest is all concealed and then pops out to the fill valve through large hole in back of cistern.
I had the WC apart in Rome in Feb saddo

 

[Magicplumb]

The two holes at the top of the cistern are for the entry of the supply.
Fitted a smillar Catalano pan not so long ago and fitted a 15mm x 1/2" bsp back plate elbow in the wall in line with one of the holes. Once fitted the flexi on the float valve can then be screwed into it. Job done.

 

[Toddyplumb]

Is there a basin with that suite, that is one piece and fits back to wall with no access to pipes and waste ?

 

[Spudhater]

I had the impression that was where/how the inlet was configured but where does the float valve go as it is on the end of the flexi!
Looks like a side entry type , does it hook onto the syphon, got no pics in the MI to help.

 

[Magicplumb]

The float valve clips into the top of the overflow pipe, behind the flush valve.

 

[Spudhater]

Now all i have to do is re route the cold supply to the top, not to bad...now that it is tiled



Many thxs for all your help...

Toilet is sorted mny thxs .....

Toilet is sorted ... (£350.00 in a sale and no soft closure toilet seat) what a waste of money.. thxs for your help..


Feeling emotional ( had a bottle of red )

L8ter Sk8ters