S
secret squirrel
I went to a customer today and the request was this.
The customer is building a loft extension and wants an en-suite. He is doing all the work himself and just wants some help with the plumbing. (I think he'll do this himself once he has the solution, but I'm interested anyway).
He does not want a soil pipe running up the outside of the dormer because it looks horrible.
The solution (I think) is from his current bathroom, plumb in an internal stack, the current toilet, bath, basin can be plumbed into this or the remaining outside stack?
OR, run an internal stack into the loft conversion then out through the tiles (between the conversion and roof), although if I do this you will still see the stack.
OR take the existing stack through the bathroom (old) ceiling with a couple of joints. This is my least favorite. The customer has done this already with 2x 45 bends but do you want to be sitting in the bath as someone above you is flushing the toilet?
With an internal stack, I am assuming it cannot be boxed in as it needs good air flow.
All the making good will be done by the customer, all I have to do is point where I need holes and he will drill them etc.
Any points of view are welcomed and pit falls. Please, don't get to technical, pretend your typing to a child.......(you won't be far off)😱
The customer is building a loft extension and wants an en-suite. He is doing all the work himself and just wants some help with the plumbing. (I think he'll do this himself once he has the solution, but I'm interested anyway).
He does not want a soil pipe running up the outside of the dormer because it looks horrible.
The solution (I think) is from his current bathroom, plumb in an internal stack, the current toilet, bath, basin can be plumbed into this or the remaining outside stack?
OR, run an internal stack into the loft conversion then out through the tiles (between the conversion and roof), although if I do this you will still see the stack.
OR take the existing stack through the bathroom (old) ceiling with a couple of joints. This is my least favorite. The customer has done this already with 2x 45 bends but do you want to be sitting in the bath as someone above you is flushing the toilet?
With an internal stack, I am assuming it cannot be boxed in as it needs good air flow.
All the making good will be done by the customer, all I have to do is point where I need holes and he will drill them etc.
Any points of view are welcomed and pit falls. Please, don't get to technical, pretend your typing to a child.......(you won't be far off)😱