Nozzle removal tool

[jono]

Hi Guys
Which burner is this tool relevant to? I've had this tool in the van for years, it wasn't cheap.
Is it for the larger commercial Burners?

 

[Dotty]

Got a picture, Jono?

 

[jono]

Hi Croppie
Van parked up the street so no pic.
Got it from HWOS years ago . BES have it in there catalogue under 21380.
Cheers

 

[Dotty]

You mean one of these?

 

[jono]

That's the one.

 

[lame plumber]

2 spanners work out a lot cheaper

 

[jono]

Before I bought it is wondered how it would grip the 2 flats which are inside the circumference of the nozzle holder. Oftec direct, Hwos, BES, all sell this tool, which burner is it useful on ?
Into the back of the garage curver box of useless tools.

 

[Dotty]

The burner's academic, you would still need to support the nozzle tube. I use 2 spanners or a 16mm socket.

 

[jono]

It's described as: 'Fits standard nozzle 16mm A/F and burner nozzle holders of 19mm A/F' ?
Perhaps it's for the American market ?

 

[SimonG]

Another one for 2 spanners. Carry enough tat around as it is.

 

[Last Plumber]

Same here, two spanners, van won't carry enough weight for all the ' special ' tools there are.
Just need to be careful you don't slip and bust the electrodes.
Take em off first !

 

[lame plumber]

Same here, two spanners, van won't carry enough weight for all the ' special ' tools there are.
Just need to be careful you don't slip and bust the electrodes.
Take em off first !

naw, live life take risks

 

[Last Plumber]

Ok if you like but Friday afternoon is best avoided