Obsolete part for baxi bermuda inset boiler 50/3 | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Obsolete part for baxi bermuda inset boiler 50/3 in the Boilers area at Plumbers Forums

Status
Not open for further replies.
R

robsmiff

I'm looking for a front panel/combustion chamber door for a Baxi Bermuda Inset boiler 50/3. G.C. No 44-077-59 part 235005BAX?

British gas have fitted a new heat exchanger but then decided that the insulation panel was damaged and the panel corroded.

My mother's been insured with British Gas since they installed the boiler and fire 15 years ago. I have sourced new insulation but the panel is obsolete.

Any suggestions would be welcome.

Thanks, Robsmiff
 
Take the panel to a sheet metal worker and get them to fabricate a copy or see if they can cut out corrosion and repair
 
Status
Not open for further replies.

Similar plumbing topics

  • Locked
Hi just an update, I fitted a new PCB about 5...
Replies
11
Views
9K
O
  • Locked
poppy-cock! agree with post #2 try ebay...
Replies
2
Views
2K
REDSAW
R
Hello All- (Usual caveats apply: I am the...
Replies
0
Views
179
S
  • Locked
That's good to know, thanks for coming back...
Replies
5
Views
3K
Dotty
D
  • Locked
low gas rates restricted gas flow somewhere...
Replies
14
Views
288
Taffman
T
Back
Top