Oil lines with soldered copper fittings problem | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Oil lines with soldered copper fittings problem

Post thread

Discuss Oil lines with soldered copper fittings problem in the Boilers area at Plumbers Forums

Status
Not open for further replies.
E

ecowarm

Photo048.jpg

Renovation work has been done to this commercial property and the oil line which was ok ran on out side in 10mm with fire valve on the outside. Now after the work has been done its inside with soldered fitting and the firevalve is also inside? You can't see but this is one of 2 boilers done the same?
 
Whip them off and do them properly. I have a really good one (much, much better than that one!) I need to photo. Won't say any more at the moment or it will spoil the surprise!
 
Status
Not open for further replies.

Similar plumbing topics

R
Grant oil boiler problem
Will try to upload pic again
Replies
4
Views
937
Red One
R
D
outside oil boiler fitted not correctly what to do next
As above The Grant instructions tell you to...
Replies
3
Views
949
exedon2
exedon2
T
Oil Boiler and System upgrade
hi, no current pipework in concrete i believe...
Replies
7
Views
1K
Type2jim
T
J
Plastic push fittings on oil boiler?
If you ask a question on site looking to learn...
Replies
4
Views
3K
DrippySpout
D
C
Oil to Gas Boiler Conversion
Hi everyone - Recently bought a house which is...
Replies
0
Views
1K
camiarrobino
C
Back
Top