- Messages
- 74
As a ballpark figure what pressure should I expect on a b11 burner Worcester Heatslave 20/25.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter richard3009
- Start date
- Replies 5
- Views 1K
Discuss Oil pump pressure on B11Heatslave 20/25 in the Boilers area at Plumbers Forums
- Messages
- 34,632
- Solutions
- 1
- Messages
- 523
Depends on nozzle size but around 7.5-9.0 bar.
MIs are available on Worcester site.
MIs are available on Worcester site.
- Messages
- 12,684
C`mon it`s oil not gas so near enough is near enough is it not?
Similar plumbing topics
Hounsfield are great boilers, but dont do a...
If its not producing heat then it's not firing...
Polite reply here, but firstly stating the...
Apologies for not attaching photos but many...
Reply was much appreciated, thank you.