H
hotandcold1
Any advice much Appreiciated.
I was called to Rayburn 480kb its Eco Flam >2001
customer complaining about fumes smell lock out. I Serviced and set up as below after
Striping cooker burner and adjusted setting No signs of damage in chamber replaced new burner seals flue readings i now set to
02---6
Co---16ppm
Co2 ---11%
xs air 40.3
so I'm relatively happy with that.
Secondly I
Stripped out boiler burner
all appears fine but exceptionally high co in flue gasses? indicating air deficiency yet combustion is set at
02---6.3
Co---289!
Co2 10.8%
xs air 43.00
oil pump pressure is fine there are no signs of blockages in flue and its twin head burner so fuel contamination could also be ruled out
Had a similar issue years ago when a farmer was burning red diesel
but this is not the case.
its doing my head in what am i missing ???
I was called to Rayburn 480kb its Eco Flam >2001
customer complaining about fumes smell lock out. I Serviced and set up as below after
Striping cooker burner and adjusted setting No signs of damage in chamber replaced new burner seals flue readings i now set to
02---6
Co---16ppm
Co2 ---11%
xs air 40.3
so I'm relatively happy with that.
Secondly I
Stripped out boiler burner
all appears fine but exceptionally high co in flue gasses? indicating air deficiency yet combustion is set at
02---6.3
Co---289!
Co2 10.8%
xs air 43.00
oil pump pressure is fine there are no signs of blockages in flue and its twin head burner so fuel contamination could also be ruled out
Had a similar issue years ago when a farmer was burning red diesel
but this is not the case.
its doing my head in what am i missing ???