S
Satellitedish
Hello Guys,
Have a problem. I’m converting my solid fuel stove to a 6” Don Oil Burner. I'm concerned about fire safety. I have a Wheelhead fire valve and a KBB c 65 fire valve. The length of the coil on the KBB is approximately 5' (not long enough to be put next to the oil tank) and another smaller one approx. 6" long.
Where exactly do I put this KBB valve, its coils, and its thermostat? The 5' is not long enough to be put outside. Also, where do I put the Wheelhead fire valve?
Can I buy a spring (or other such instrument) to bend a 3/8 (10mm) copper pipe without it kinking to a 90° angle?
Thanks
John
Have a problem. I’m converting my solid fuel stove to a 6” Don Oil Burner. I'm concerned about fire safety. I have a Wheelhead fire valve and a KBB c 65 fire valve. The length of the coil on the KBB is approximately 5' (not long enough to be put next to the oil tank) and another smaller one approx. 6" long.
Where exactly do I put this KBB valve, its coils, and its thermostat? The 5' is not long enough to be put outside. Also, where do I put the Wheelhead fire valve?
Can I buy a spring (or other such instrument) to bend a 3/8 (10mm) copper pipe without it kinking to a 90° angle?
Thanks
John