Old Bathroom Tap - How to access to internals | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Old Bathroom Tap - How to access to internals in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
2
I Have an Old Bathroom Tap - How to access to internals to change washer
I changed one some years ago, I have forgotten how it was down.
Please advise.
How to gain acess.jpg


The whole tap looks like:-

IMG_7805.JPG
 
green arrow dome part should unscrew can be tight so might need something to grip it that wont damage it
 
Try wrapping very roughly a few turns of electric insulating tape on the above part so your hand gets a really good grip.
Or a strap wrench (plastic handle with rubber strap type wrench) might grip it
 

Similar plumbing topics

Have you got a photo of the sink at the...
Replies
2
Views
632
  • Question
Gave it a good pull with 2 hands and it just...
Replies
7
Views
1K
  • Question
Installing a P-shaped shower bath in a small...
Replies
5
Views
1K
  • Question
Hi all, hope this is okay to post. Just over...
Replies
0
Views
220
  • Question
Many thanks for your advice I will get up into...
Replies
3
Views
490
Back
Top