Olives Brass or copper | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Olives Brass or copper in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
the only difference is some of the fittings will only take copper olives for some reason. some of the brass olives are thinner and don't squash with some fittings
 
So you can use either copper olives or brass on gas fittings as long as the olive squashes up??
Thanks for your help by the way..
 
Last edited by a moderator:
you can't change any thing on gas unless you are corgi qualified
 
If you are intending to use compression fittings with plastic pipe then you should only use copper olives. They compress more easily and seal to the plastic pipe.

Mark
 
the different olives do come in to play with brass fittings in LPG due to the possible electrolytic properties caused by the use of a harder quality of brass can't remember the bs no. off hand but thats the only time they are different for a reason
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Do any of you guys use this type of reducer...
Replies
0
Views
419
    • Like
  • Question
What a great and informative post! Thanks for...
Replies
1
Views
973
  • Question
Yep just need to cut the grab ring off with...
Replies
1
Views
296
  • Question
It’s massive in size so if under a floor it’s...
Replies
6
Views
906
  • Question
The stopcock wasn't too far away, but far...
Replies
10
Views
739
Back
Top