On/off peak water tank switch help | Plumbing Zone | All Other Country's | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

On/off peak water tank switch help

Post thread

Post reply

Thread starter PaulWooder
Start date Nov 18, 2012
Replies 0
Views 2K
Tags

tank water water tank

Discuss On/off peak water tank switch help in the Plumbing Zone | All Other Country's area at Plumbers Forums

PaulWooder

Nov 18, 2012

Hi, I have a Water tank with two immersion heaters. The off peak switch heats the bottom immersion and the on peak switch heats the top immersion.
my problem is the top immersion does not give enough water for a bath in the evening.
can I rewire the on peak wire into the bottom immersion heater too? So that when I do flick the on peak switch a whole tank is heated. I know this will cost me more but I need a tank full early evening.
I have also purchased a timer so I was going to do the rewiring as above and put a timer on the on peak switch.

any advice would be much appreciated.