Outside tap in a terraced house (and hello) | The Welcome Wagon :) | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

  • Thread starter 9wizard9
  • Start date
  • Replies 7
  • Views 11K

Discuss Outside tap in a terraced house (and hello) in the The Welcome Wagon :) area at Plumbers Forums

Status
Not open for further replies.
9

9wizard9

Hi there - my first post on this site.

Potentially a bit of a funny question, but I want to fit an outside tap to the front of a terraced house. Problem is, all of the existing pipework that is exposed is at the rear of the house, and the whole ground floor has just had expensive oak flooring put down.

Is there any way that anyone can think of to plumb in a tap at the front without having to take up the flooring (which I'm guessing will ruin the finish on the floor)?

The mains water supply runs under the street at the front of the house, so presumably somewhere there must be a pipe under the front garden linking that to the rear of the house - might it be possible to connect a tap to this from the outside of the house at the front?

Thanks for any help you might be able to give.
 
it seems like a fairly straight forward task, dig up the garden, find the pipe and dig a track (min 760mm deep) to where you want the new tap, turn off the water at the street, cut in a tee piece and a new toby valve (so you can isolate outside tap in winter) run a pipe andconnect your new tap (check all requirements for back flow prevention etc, a double check valve should be fitted inside, but you wont have any inside pipework
 
Hi. Do some home work prior to digging. As to what type of material the supply pipe is made from. If its lead pipe it may be difficult to branch into. Good Luck
 
Alternatively it may be possible to run a pipe up the inside of the house teed off from the rear pipework, then go via the loft or underneath the first floor boards, then down again inside the front of the house to join the new outside tap!

Could use PEX plastic pipework and/or copper and use corners of the rooms (then box in) or any existing ducting to hide the piping. I have done this on two houses successfully using existing ducting.

PS Hello!
 
Last edited:
Thanks for all the helpful replies - sounds like there are a number of options that should work then.
 
stick a rain barrel on the down pipe to your gutters, free fm some councils. cheap and you dont use mains to water your garden
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Many thanks for the advice.
Replies
3
Views
796
  • Question
Yes or they do an extra tank so brings it upto...
Replies
3
Views
504
  • Question
To join galvanised water services without...
Replies
3
Views
990
Many thanks for the helpful replies. There's...
Replies
4
Views
1K
Back
Top