Over rim type Bidets

[andf380]

Got one to fit tomorrow i am right in thinking that they are ok to be taken on the same supply as the washbasin for hot and cold as they only require a AUK2 air gap as a air break the taps are 1/2" so a minimum of 20mm air gap i do not need to fit check valves and the waste must go directly into the soil stack if someone could confirm these are the correct regs


Thanks

Andy

 

[stevetheplumber]

yes thats right

 

[sas]

far as i know you must ask for a permission before you fit one as they have a high risk of contamination in water. They want to know what will go down into drains too.

Flued category 5!!!