Overflow street elbow

[Rybo_1]

Been on a few installs over the years where I've thought a overflow street would come in so handy. Do they exist? Has anyone here come across one?

 

[jase158]

yes, would love one, went into williams in littlehampton and they said it doesn't exist, surely they should do one!!!

 

[Roger Welton]

Would also find them handy, definite gap in the market. Black overflow pipe would be nice at times also

 

[Ermintrude]

Black overflow and fittings made by flowplast. Sockets much deeper and stronger than poly pipe and 1/3 of the price. Ask your merchant to order some from their supplier we bulk buy from a wholesaler "primaflow" I got some 32mm streets in van. Also flowplast will form bends and offsets on a 22mm bender

 

[Rybo_1]

Not 32mm streets. Im on about 22mm overflow/condense street elbows

 

[Rybo_1]

Or 21.5mm to be precise

 

[Ray Stafford]

I've never seen them - but thats not to say that they don't exist.

Am seeing the Polypipe top brass in a couple of weeks, and will mention it.

 

[Rybo_1]

Throw in a question about a street 45 whilst your at it! :yes:

 

[Ermintrude]

Didn't Osama make them? Or a scoket that went on outside of elbow ? Why u a need streets? Shouldn't bed bending and twisting conny that tightly? I like 45d Bends. But sure soma made some . And Marley ?

 

[ne1ls0n]

Mcalpine do them, had a few for boiler installs

 

[Ermintrude]

Oh yeh. I've got some of them in van actually. From Clamp 1gr?

 

[Billy Bob Bob]

or otherwise known as a M+F,while we are on the subject why are they not a standard 21.5 mm? there a big difference in overflow sizes some brands fit others but lots dont interfit

 

[Ermintrude]

Centerbrand is horrible - fitting has a slip of about 2.15mm for tube to fix into.

 

[gasmanrob]

Centerbrand is horrible - fitting has a slip of about 2.15mm for tube to fix into.

Yeah that and you need a re mortgage to buy a complete bag of fittings

 

[jase158]

is there a 22mm x 21.5 mm coupling, I had some that did the job, not sure if they were meant to do it!!! so annoying when you get to a job and its 22mm, instead of 21.5.
especially on vaillants, where they are glued on and the idiot installer has put 22mm onto 21.5mm fitting