overgassed appliance

[rm1]

after a routine safety check the gas fire is overgassed this is "at risk" the working pressure at the meter is 26mb if you have met1 can you break the seal of the governor and adjust the pressure at the meter then replace the seal or do you need to call the gas service provider

 

[GQuigley67]

I don't think we can touch it only Transco...
what is the point in met1 anyway ?

 

[kirkgas]

I don't think we can touch it only Transco...
what is the point in met1 anyway ?

you dont need MET1 but you do need to have gas quals and permission to alter the govenor (ie by working for the gas supplier or an approved contractor)
mmmhhh why have MET1, you need it to alter the position of an internal gas meter, you need to do a visual inspection of existing and proposed new position(in CCN1) you need to do a TT (in CCN1) you need to safely remove and store the meter (in CCN1) you need to alter pipework (in CCN1) HAHA YOU NEED TO REPOSITION THE METER BRACKET THATS IT, you then need to refit, depending on new position you may need to fit labels to identify original ECV position etc (in CCN1) retest, purge and relight (all in CCN1 but i was getting bored)
eh you are right, its no really worth the dosh is it

 

[stevetheplumber]

More dosh for the training industry you mean
when a country isnt producing anything to make money you have to create work within that country to circulate the worthless tender of the land around