Perfect Pump Valves?

[Ray Stafford]

Well, thats what it says on the box, but is it true? Its hard to tell with pump valves - its not just about when you fit them, its what they are like in 10yrs time when the next guy has to change the pump. They aren't cheap either, so they had better be good to live up to the name and price.

A pair of freebie perfect pump valves to the first 5 GSR or Plumbers Arms members to PM me a snail mail address, and promise to come back on the forum to give a bit of feedback - EXCEPT:

If Bod, Buckley Plumb, Kev the Gas, Nicro or Gray0689 get in first, they will have to sit out the next forum freebie that I do, so that we can spread it around a bit.

Redsaw is excluded completely from this round, because he is mean and disqualified my JOTM entry .

Ray

 

[PlumbBobBob]

done.

 

[Destroyer2813]

Hopfully they will stand the test of time, same as lever valves fair better than gate valves

 

[aaronsmith]

wonder if they will leak out spindle like most pump valves do when they have no been turned in a long time

 

[Nostrum]

Saw these in one of the mags and thought they looked good. I'm forever hammering them off on social housing jobs where the systems are shyte so the pump fails prematurely and i've never got the same pump to replace just the head.

 

[Ray Stafford]

Freebies now gone!

 

[JCplumb]

Done
BTW, they're 'perfect' so how could they possibly leak from the spindle or seize?

 

[Ray Stafford]

SteveB (less than a minute, I wonder if his wallet comes out as quick in the pub?) SimonF, SambotC, TBServices and GasMan were first. One bonus set to JCPlumb who was very close behind GasMan.

 

[TBServices]

Yes!! I made it! Thanks very much Ray

 

[Billy Bob Bob]

SteveB (less than a minute, I wonder if his wallet comes out as quick in the pub?) SimonF, SambotC, TBServices and GasMan were first. One bonus set to JCPlumb who was very close behind GasMan.

cheers ray,they should hopefully be ok,for a long time now i have stopped using gatevalves(asd they pass) in favour of full bore quarter turn isos,no problems to date,these pump valves are the same as full bore isos

 

[Nostrum]

Yipeeeee


Thanks again Ray. Looking forward to my next pump replacement :freak:

 

[AWheating]

thoses that have got them must come back in 15 years time and tell us if they still turn off

 

[Destroyer2813]

Damm to slow gonna have to buy some to try em out instead

 

[Nostrum]

You can have one of mine if you like :confused5:

 

[Destroyer2813]

^^ least i know one valve may shut off then

 

[JCplumb]

Cheers Ray!
Actually have what sounds like a pump replacement next week (upstairs rads hot, downstairs rads cold, open vent system). Fingers crossed they have no valves... I didn't ever think I'd hear myself say (type) that

 

[PlumbBobBob]

SteveB (less than a minute, I wonder if his wallet comes out as quick in the pub?) SimonF, SambotC, TBServices and GasMan were first. One bonus set to JCPlumb who was very close behind GasMan.

i have a very fast wallet unlike someone else on here lol(not saying who:wink_smile

 

[Gray0689]

What make are the valves ray and can I ask how much do the retail at
Cheers

 

[Destroyer2813]

I thought mine was fast but not as fast as yours Steve

 

[PlumbBobBob]

i just happened upon the thread at the right time

 

[Billy Bob Bob]

i have a very fast wallet unlike someone else on here lol(not saying who:wink_smile

croppie*cough*

 

[PlumbBobBob]

not sayin lol

 

[Ray Stafford]

What make are the valves ray and can I ask how much do the retail at
Cheers

Hi Gray0689.

They are designed and imported by a guy called Rob Pond - he is an agent and importer that deals in "bright ideas" plumbing bits. I have known Rob for about 20 years, and every time I see him, he puts some weird bit of brass on my desk. Sometimes its brilliant, sometimes not so practical. Lots of his stuff is sold under other re-sellers own label. Most independent merchants will know of Pondy.

We have only just taken these on, and haven't put a price on them yet, but it is likely to be around the £12 - £14 mark. Still researching at the moment.

Ray

 

[Gray0689]

No worries thanks ray

 

[aaronsmith]

Done
BTW, they're 'perfect' so how could they possibly leak from the spindle or seize?

they wont be perfect after 5 6 years!