Permanently hot radiator | Central Heating Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Permanently hot radiator in the Central Heating Forum area at Plumbers Forums

Messages
5
Am I correct in thinking that in our central heating system one radiator has to be permanently on? We have a radiator in a bathroom that is constantly drawing from the boiler and is constantly hot. It doesn't have a control on. I think I understand that a radiator needs to be open but if we put a valve on it could it be open on a low setting rather than being on top heat permanently?
 
Why is your boiler always on?
It's a combi boiler it's always on to heat the hot water when a hot water tap is used. By "on" I don't mean permanently fired up heating something but it does fire up to heat that single radiator far more often than necessary and seemingly unrelatedly to whether any hot water taps have recently been run. In general though, the rest of the system is run by a Tado system and all radiators set to 18' which means at present it's effectively not on, but on standby for the central heating.
 
Combi boilers create instantaneous hot water via a plate to plate heat exchanger. Not the same pipe circuit as your radiators. So no there should definitely be no reason for a radiator to be on all the time. Unless:

There is a boiler fault

You have a faulty Tado radiator head on that radiator. Swap one of the heads and see if it persists. Is the radiator actually somewhere that is colder than 18°c most of the time and this is causing the Tado head to call for heat.

Your Tado has not been set up properly
 

Similar plumbing topics

Pin hole leak on suction side of pump.
Replies
1
Views
467
1/4 turn black knob on both. open bleed screw...
Replies
7
Views
833
Everything working fine on PP mode - thanks...
Replies
7
Views
916
They can stick quite easily, try a spray with...
Replies
4
Views
727
Hi Just looking for some suggestions on what...
Replies
0
Views
1K
Back
Top