plastic pipe for oil tank feed to boiler | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss plastic pipe for oil tank feed to boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
F

froggy

would it be possible to use per /pex plastic pipe on a oil tank feed to the boiler,in place of the old copper one.
 
Hi froggy, welcome to the forums. Your better off posting this in the plumbing forum, you'll get a better response in there.

cheers
 
You need pipe fit for oil & underground...

Qual-Oil Pipe 50m x 10mm | Oil Tanks | NoLinkingToThis
 
Qual pipe, inserts, cant expose it to light.

plastic.coated copper is more preferable imho
 
You can use the pipe above but not many do because legally it cannot come above ground so you have to fit two inspection hatches either end and adapt it to copper before it comes out of the ground. The hatches must stay for ever to insect the joint for leaks. It is easier to just do the whole run in plastic coated copper.
 
Status
Not open for further replies.

Similar plumbing topics

what is the elevation and run length between...
Replies
2
Views
618
hi, no current pipework in concrete i believe...
Replies
7
Views
1K
So getting back to my original question, do...
Replies
3
Views
788
Most modern/new build properties round here...
Replies
2
Views
1K
https://www.pipelife.co.uk/content/dam/pipelife...
Replies
6
Views
3K
Back
Top