Plastic pipes too close to boiler | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Plastic pipes too close to boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
5
Hi jus after some advice on a terrible install I came accross today plastic pipes right up to the boiler is this ncs???
 
NTCS is a gas classification. Best you can do is not fitted to manufacturers instructions.
 
Thanks for the reply I'm a gse I issued an advise notice stating the installation was ntcs just wanted to know if I did the right thing?
 
When i was at phex last year a rep from some plastic pipe company was doing his sales pitch on me. Cant remember the manufacture as i wasnt really listening, but i do remember him saying that this particular pipe you can take quite close to the boiler.
 
I'm not GS, but I'm sure that's exactly what I remember reading somewhere.
 
most manufacturers recommend atleast a meter away, i try and keep 3m away myself but it cant aways been done on some routes.

as for classification it does not come under the gas regs only MI.
 
The different plastic pipe manufacturers also state not to connect directly to boiler and to leave at least 1000mm.
Obviously not including the condensate :)
 
Status
Not open for further replies.

Similar plumbing topics

Most modern/new build properties round here...
Replies
2
Views
1K
If you ask a question on site looking to learn...
Replies
4
Views
3K
Hi @Jim Goodenough I do have some yes , I did...
Replies
2
Views
787
Absolute cock & bull from SGN, think about...
Replies
8
Views
2K
Back
Top