Plumber or electrician to replace new timer switch Unvented cylinder | UK Plumbers Forums | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Plumber or electrician to replace new timer switch Unvented cylinder in the UK Plumbers Forums area at Plumbers Forums

Messages
15
Replace the current E7 Newlec Economy control to a mechanical 24 hour timer switch for unvented cylinder water heater, may I know if I ask plumber or electrician to do this job.

Because Newlec Economy controller can heat up water once a day in midnight .I would require constant hot water in different time slot per day.

How to Make sure that Timer switch wire connects with bottom element instead of top element ( boost). As the boost can heat up 1/3 of tank water only.

Appreciate for any help or guidance. Thank you.
 

Attachments

  • replacement.png
    replacement.png
    291.7 KB · Views: 40
Spark but that timer you have chosen isn’t suitable for your setup
 

Similar plumbing topics

  • Question
Hi Baster, Thank you so much for your detailed...
Replies
7
Views
4K
  • Question
Thanks, I'll insulate it then. Would the...
Replies
12
Views
1K
  • Question
Except your response got me thinking. Going...
Replies
5
Views
577
Replies
2
Views
768
Replies
1
Views
1K
Back
Top