Plumbing an island sink | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Plumbing an island sink in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
4
Hi all, I am in the process of planning my single storey extensions plumbing and drainage.
Our kitchen plan has an island with a sink in it and im trying to work out how to get waste in and hot cold supply.
I am having a solid floor construction of 150mm gravel, sand, dpm, concrete. Then in prep for underfloor heating - celotex with a 70mm screed on top.
My thoughts are waste pipe between celotex and concrete maybe a form adding to concrete and sculpted celotex. The same for hot and cold supply potentially ran in another length of pvc pipe to protect them? Waste would be plumbed into new 110mm external drainage. Any advice welcomed as I will be doing all plumbing inclusive of drainage to cut down on cost. Thanks
 
Sounds about right as long as it isn't over a massive distance. (Waste pipe). Could be wrong but 70mm sounds excessive.
 
If it's more than a 3m run then you will need 50mm waste pipe , solvent weld fittings and pipe , hot and cold pipework I would use hep 2o pipe in pipe strapped to the concrete slab under the celotex. Cheers kop
 
If it's more than a 3m run then you will need 50mm waste pipe , solvent weld fittings and pipe , hot and cold pipework I would use hep 2o pipe in pipe strapped to the concrete slab under the celotex. Cheers kop
Thanks Kop, how do you plumb the waste trap as a normal one is horizontal and this will be vertical?
 
Last edited:
Are you making allowances for getting power to the Island as well?
Hi Snowhead, yes I am there will only be a requirement for a pop up socket so will incorporate that as part of the ring main for the sockets, again I was thinking to run this thru plastic conduit again.
 
Status
Not open for further replies.

Similar plumbing topics

Thanks for the update
Replies
15
Views
8K
there is a wirquin trap with built in venting...
Replies
6
Views
3K
  • Locked
Thanks everyone for your helpfull info .
Replies
17
Views
315
B
Cheers Brum. Have dropped you an email.
Replies
20
Views
3K
BurstPipe
B
1
  • Locked
Each manufacturer tends to suggest a slightly...
Replies
16
Views
5K
Back
Top