Pop up basin waste | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Pop up basin waste in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

nicro3

Plumbers Arms member
Plumber
Messages
814
Had today to repair leaking pop up waste on plastic vanity basin. The customer says was done before by a n other. The problem is the over flow is a banjo type, meaning tail of waste is to short to attach to pop up part on other side of over flow and use washers. Does any one know of a pop up that has longer tail (the waste going through hole in basin)?
 
I don't fit them anymore, they always break, especially with kids in a house. I use a non mechanical waste that looks terrific called a captive waste. It contains a polished chrome swivel plug that doesn't come out to get lost and no mechanical parts that can get broken:

Captive Basin Waste | NoLinkingToThis
 
I agree captive wastes are nice, got to convince my customer of that . Just wondered if any longs tail pop ups on the market, before offering an alternative
 
I agree captive wastes are nice, got to convince my customer of that . Just wondered if any longs tail pop ups on the market, before offering an alternative
Offer the captive as a long term alternative. Pop ups are cack, as are sprung wastes. Captives have no mechanical parts that can break and no plug and chain to cause bother either.
 
I don't fit them anymore, they always break, especially with kids in a house. I use a non mechanical waste that looks terrific called a captive waste. It contains a polished chrome swivel plug that doesn't come out to get lost and no mechanical parts that can get broken:

Captive Basin Waste | NoLinkingToThis

Agree on this one, but mostly use a click clack, these pop up wastes drive me crackers !
 
Agree on this one, but mostly use a click clack, these pop up wastes drive me crackers !
Next time why not try a captive instead. By the way the same ones that Screwfix sell for £9.99 are available on Ebay for about a fiver each.

All my customers have been impressed and rave about the captive wastes. Simplicity, functionality, they work and don't break!
 
Next time why not try a captive instead. By the way the same ones that Screwfix sell for £9.99 are available on Ebay for about a fiver each.

All my customers have been impressed and rave about the captive wastes. Simplicity, functionality, they work and don't break!

That I will Sir !
 
i stopped using pop ups when a biggish company recalled all there because of problems they where the only compnay to recall theres ! one of the managers at the branch told me that there suppliers supply to alot of even bigger companies so there somes to be alot of dodgy ones about. but they are all pretty pants even before the recall.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Some old shower trays used to have included...
Replies
6
Views
849
  • Question
Or use one of these Basin Waste Seal Kit |...
Replies
3
Views
1K
  • Question
Those Vado wastes are great and it looks like...
Replies
7
Views
1K
  • Question
New unit sorry to say
Replies
5
Views
2K
10 o’clock / 45 degrees would be better than...
Replies
3
Views
686
Back
Top