Potterton E168 error code | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Potterton E168 error code in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

ISM

Plumbers Arms member
Plumber
Gas Engineer
Messages
48
E168 error code, what the f**k is going on here. can anyone please help!? I turned the boiler off at the board (no fuse spur and old style mains board) to drain down and install new pipework. Turn back on, wam bam thank you mam, E168!! What the F**k!
 
I had this couple weeks ago , its an electrical fault , 9 out of 10 times its the pcb,,,,, the so called ghost code . but no code E168 in the MIs,,
 
Sometimes you can fart around and get it back if lucky ,,, The one i had 2 weeks ago was E133 , and E119 , and while fixing it i had the E168 , i changed the pcb and the pressure sensor and all was well , but before i fixed it the E168 came up but managed to get it going again till i ordered the new parts ,
 
E168 error code, what the f**k is going on here. can anyone please help!? I turned the boiler off at the board (no fuse spur and old style mains board) to drain down and install new pipework. Turn back on, wam bam thank you mam, E168!! What the F**k!

Rule one,no swearing,even asterixed swearing ,no issue with it in the arms but not in here or the open forums,Rule 2,its normally the pcb,but not always,i can talk you through it but unless you are fully conversant with a multi meter,its pointless
 
Status
Not open for further replies.

Similar plumbing topics

P
Tricky situation for you. Boiler shouldn't...
Replies
2
Views
434
Thank you for the detailed and considered...
Replies
14
Views
1K
Me too. One pipe at a time, wet vac to hand...
Replies
4
Views
615
Heating repaired. Was the central heating zone...
Replies
14
Views
2K
Get the spark back who fitted the first spur...
Replies
1
Views
63
Back
Top