Potterton F50 | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Potterton F50 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

Butchico

Hi

My elderly mothers boiler has stopped working and im looking for some advice.
She has a potterton f50.
This has been an on going issue for a while now and its finally kicked the bucket.

She called me up as the the fuses had tripped. Clicked the breakers and the boiler isnt turning on
She has told me she has been pressing the reset button everytime the boiler cuts for a while now but it is in the compressed position all the time.

There doesnt seem to be any power to the boiler (no fan noise or ignition)

If anyone has any advise please help!
 
:welcome:Hi Butchico and welcome to the forum's you need a gassafe engineer to check over the boiler ..where are you based ? You can try on the I'm looking for a plumber/gassafe engineer section of the forum's .....regards Turnpin
 
Boiler won't ignite unless fan is working. If you cannot hear fan and you have 240 volts at the boiler then its a job for gas safe engineer. If mother is in receipt of state benefits then grant available for new boiler.
 
Status
Not open for further replies.

Similar plumbing topics

This may help bud check the pump overun stat
Replies
2
Views
2K
Replies
14
Views
1K
Thanks some good ideas. Just as an aside if we...
Replies
10
Views
2K
Thanks everybody for your advise. Will call...
Replies
8
Views
5K
Thanks everybody - getting the engineer back...
Replies
8
Views
4K
Back
Top