Potterton Gas Mag Valve Needed | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Potterton Gas Mag Valve Needed in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
D

Dazza2471

Hi Guys, my father in laws central heating system has packed up and we need a Potterton Neterheat 1016 Electronic Gas Mag Valve. Apparantly the part no. is 907219. If anyone could help i would be very grateful?? Many thanks
 
I would not bother trying to get the part that boiler must be 20years old minimum and is in need of replacement. They were a good boiler in there day. Also you need to check the condition of the case seals and check the condition of the case at the rear as they are known to rust out which is very dangerous as if my memory serves me right these boilers are positive pressure fans which means that the case is under positive pressure so any defects in the cas or seals will result in products of combustion being discharged into the room. VERY DANGEROUS
 
agree with John,he is spot on,there have been a few deaths from this boiler
Time to replace
 
Status
Not open for further replies.

Similar plumbing topics

One DM in five years? Congratulations on...
Replies
2
Views
824
Also, they could even supply their own tube...
Replies
19
Views
2K
Finally got an update from him. He cant do the...
Replies
2
Views
832
  • Locked
Still being called spammy by the forum filters...
Replies
8
Views
1K
Back
Top