I’m having problems with a Potterton Performa 24, it works fine on hot water. When we call for heating it flashes up for 2 seconds then goes to reset with the case off. When the case is on it lasts a little longer but doesn’t recognise its alight. Tried a new board to no avail still the same. Electrodes and leads are good, thermistor resistance ok, pump proving switch makes ok. Totally puzzled how it can work fine on hot water yet keep sparking on heating until it goes to reset. Help please.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Potterton Performa 24 in the Plumbing Jobs | The Job-board area at Plumbers Forums
- Status
- Messages
- 4,850
Burner pressure ok?
1.8 mbar min
1.8 mbar min
- Status
Similar plumbing topics
Do you have any external controls ? May be...
- Jack of All
- Plumbing Jobs | The Job-board
- 1
- 1K
- Latest:
- AMGasServices
Keep a diary recording the dates/times of when...
- Anthony86
- Central Heating Forum
- 5
- 3K
- Latest:
- Chuck
- Locked
If its not rectifying it will stop in seconds...
- MK Heating
- Plumbing Jobs | The Job-board
- 1
- 134
- Latest:
- townfanjon
- Locked
Hi Everyone,
Thanks for all the help, went...
- plumb_know
- Plumbing Jobs | The Job-board
- 22
- 467
- Latest:
- plumb_know
- Locked
Thankyou for your input gentlemen its all a...
