Potterton profile 60e won't start.

[flesi]

Hi guys,having a bit of issue with profile 60e. Basically so far I've checked the reset button , 240v going to the boiler, no power to the pump and fan, checked the external controls. Apparently the costumer had reset the boiler quite often for the past year. Seems like some overheating issues but following the fault finding chart it points to APS. Anyone got any idea please . Cheers

 

[zeebeedee]

If there the same as the primas and I think they are, I always change the board and aps, gets it everytime

 

[flesi]

If there the same as the primas and I think they are, I always change the board and aps, gets it everytime

Thanks for the quick reply.

 

[mountainman]

Common issues with dry joints on the pcb on these boilers, if your handy with a soldering iron it's often worth a punt.

 

[heliotrope]

Check out the APS. Also check no water or blockage in tubes.

Board interrogates APS before supplying power to fan etc.

 

[allwright]

Check out overheat stat, prone to failing

 

[herp_lee]

yep PCB mate

 

[shaky]

Defo PCB

 

[flesi]

Changed PCB and APS , boiler seems to work fine . Thx for your advices .

 

[zeebeedee]

Changed PCB and APS , boiler seems to work fine . Thx for your advices .

Never seen anything else fail on the boilers