potterton puma 100 no heating or hot water

[sav]

got one of these god dam boilers and its not giving any heating or hot water wont fire up at all!

ive checked the fault flow chart on the back of the case as they dont have the manual and it says replace the fan if power is above 80 volt ive checked the valtage and im getting 96v atm with nothing happening so i think its the fan

would i be correct or could there be another problem?

thanks for the help

 

[sav]

any one lol

 

[gasmarc]

which puma is it an e or p

 

[aggis]

Need to do more tests to confirm, if in doubt ring Potterton 0844 335 8428

 

[gasmarc]

the fan for a puma is around £150 so i would not make that mistake if i were you

 

[Billy Bob Bob]

get a gsr (unless you are) or replace it

 

[poppyppop]

So your confirming it'sthe fan? cheers.

 

[Billy Bob Bob]

So your confirming it'sthe fan? cheers.

no no ones saying its the fan,its fu...wan........ not well,get a new one,old boilers are like old cars unless you have bottomless pockets get rid past its sell; by date or call in a gsr,who will fault it and not guess which parts have failed

 

[gasmarc]

no i am not ,more information would be needed

 

[sav]

sorry it was a fault on the fan it was one of those intermittent faults where the customer would ring me i would go round there and the bloody thing was working again! so i bit the bullet and changed the fan today and its working a ok

dident mean to confuse people by the way i am gsr

 

[gasmarc]

fingers crossed lol good luck