Hi
I have a problem with a potterton Statesman system boiler. Riello R40 G5. I'm getting lock out after about 15 sec. Motor runs, oil to pump. Although slow bleeding through pump bleeder. No pressure on gauge at all.
Previous plumber has changed pump solenoid.. Im suspecting pump or broken drive coupling to start with... I ve got downloaded potterton statesman manuals but they do not have any details of boiler setup..Pressure setting, nozzle size, CO2, temps per kw output sizes etc. It says refer to burner manual? I usually use these to get the correct manufactures settings and nozzle. Does any one have these or know where to get them.
If Im getting about 20volts between white and black at control box is that a knackered motor. Even though it sound fine.?
I have a problem with a potterton Statesman system boiler. Riello R40 G5. I'm getting lock out after about 15 sec. Motor runs, oil to pump. Although slow bleeding through pump bleeder. No pressure on gauge at all.
Previous plumber has changed pump solenoid.. Im suspecting pump or broken drive coupling to start with... I ve got downloaded potterton statesman manuals but they do not have any details of boiler setup..Pressure setting, nozzle size, CO2, temps per kw output sizes etc. It says refer to burner manual? I usually use these to get the correct manufactures settings and nozzle. Does any one have these or know where to get them.
If Im getting about 20volts between white and black at control box is that a knackered motor. Even though it sound fine.?