Hi,
Went to service a suprima, it's not working.
If put on a demand for Ch or hw, you hear a 'click' at the boiler, no sparking, fan does not run, the pump will spin for a second and stops. Voltage drops in and out.
Had a new PCb 6 years ago.
Customer said this has been happening since he drained the system and fitted 2 new rads. I put a magnet on the separator and it sticks good and proper. I said to cust, likely blockage on cold feed. He has since repiped and said boiler doing the same as before.
I'm thinking aps or PCb.
Any other ideas? Thanks
Went to service a suprima, it's not working.
If put on a demand for Ch or hw, you hear a 'click' at the boiler, no sparking, fan does not run, the pump will spin for a second and stops. Voltage drops in and out.
Had a new PCb 6 years ago.
Customer said this has been happening since he drained the system and fitted 2 new rads. I put a magnet on the separator and it sticks good and proper. I said to cust, likely blockage on cold feed. He has since repiped and said boiler doing the same as before.
I'm thinking aps or PCb.
Any other ideas? Thanks
Last edited: