Power shower pump problem | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Power shower pump problem in the Showers and Wetrooms Advice area at Plumbers Forums

T

theoldboy

I had a water pump fitted some time ago to provide a power shower facility. It seemed to work fine for a while but now there's obviously a problem with pressure/air/cavatation. The pump is fitted very close to the outlet to the hot tank, so I can't see how air is getting in. the pump knocks and screams after it has been running for a while.

i've been reading things and I've come across a reference to a flange of some sort. Any words of wisdom anyone can add?

I would go back to the 'plumbers' (not sure plumber is fair, more like fitters) but they went bust and I can't track him down.
 
I had a water pump fitted some time ago to provide a power shower facility. It seemed to work fine for a while but now there's obviously a problem with pressure/air/cavatation. The pump is fitted very close to the outlet to the hot tank, so I can't see how air is getting in. the pump knocks and screams after it has been running for a while.

It may be the hot water flashing off to steam due to the reduction in pressure caused by the suction of the pump. Try lowering the HW temperature in the cylinder a little to see if that makes any difference.

Also, try to bleed off any air/steam bubbles by moving the temperature control on the shower from hot to cold to hot a couple of times to 'burp' the pipework.
 
Upvote 0
I'll give the first a try - though I'd have thought the higher the tempreture the less draw needed from the hot.
I guess what I'm really after is a fix as opposed to a work round
thanks for the input.
 
Upvote 0
9cd17c67_holy20thread20resurrection.jpg
 
Upvote 0

Similar plumbing topics

A
  • Question
Stnd wrong pump for a high pressure shower...
Replies
1
Views
735
D
  • Question
Any pictures of the top connector of the...
Replies
1
Views
961
  • Question
Yup and undersized flow/returns/heat emitters...
Replies
29
Views
6K
  • Question
Thanks Knappers, I will take a take a look at...
Replies
3
Views
872
  • Question
Thanks Shaun: Yes, but some info I've seen...
Replies
4
Views
1K
Back
Top