Powerflush through pump head. | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Powerflush through pump head. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Deleted member 32524

Plumbers Arms member
Plumber
Gas Engineer
Messages
725
Hello,

Doing a powerflush and I have bought the pump head adaptor for my Kamco machine.

Question is. Has anyone has any problems using this method i.e pumphead not sealing properly once you put it back on, etc?
 
Hello,

Doing a powerflush and I have bought the pump head adaptor for my Kamco machine.

Question is. Has anyone has any problems using this method i.e pumphead not sealing properly once you put it back on, etc?

Never had a problem when replacing pump head, but beware that the O-ring they provide (the big, outer ring) will not seal the adapter when flushing EcoTECs. Kamco will tell you that you need to buy an additional 7mm thick O-ring, but you can take the flat one off the pump head and use it combined with the Kamco one and it works...
 
If stuck get some no frills liquid ptfe from screwfix run a tiny bead around outside if seal on head clamp it up...
 
Dont forget that if fixing adaptor to plastic pump housing dont overtighten the middle of the adaptor as it'll go through the housing leaving you in the poo.
Someone I know did it!!
 
Dont forget that if fixing adaptor to plastic pump housing dont overtighten the middle of the adaptor as it'll go through the housing leaving you in the poo.
Someone I know did it!!

someone I no ? Wink wink ha ha
 
Thanks guys. Helpful info. I was just a little worried as I have never done it through pump head and could just see it turning in to a nightmare.

Thanks again.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Totally incompatible. Look at bumping up the...
Replies
3
Views
479
Any gas boiler's HEX can stand a static head...
Replies
16
Views
1K
Replies
1
Views
970
  • Locked
Put my powerflusher up for sale on eBay for...
Replies
0
Views
2K
Hello, I have a job with a Potterton Powermax...
Replies
0
Views
857
Back
Top