Hello wisemen,
I have a little problem on this installation i went on to do a cp12. i found a pressure drop that was over the permissible limits.
basically its a G4 meter connected to a boiler in 22mm and 15mm to cooker and i found a drop over 4mbar. the pressure kept on dropping slowly over a 3-4 min time. i tested several times on 2 mins to be sure there was an actual drop. after i went over 2 mins to observe the drop.
i also disconnected the appliances and tested the pipework only,we are looking at about 3 metres of pipework run and i still found a drop in the pipework. tested all the joints and fittings with ldf but no leaks! though the pressure kept dropping.
has anyone come across such a situation, i will appreciate your inputs in this matter. Its baffled me and i hope you can help me on this matter.
thanks fellows.
I have a little problem on this installation i went on to do a cp12. i found a pressure drop that was over the permissible limits.
basically its a G4 meter connected to a boiler in 22mm and 15mm to cooker and i found a drop over 4mbar. the pressure kept on dropping slowly over a 3-4 min time. i tested several times on 2 mins to be sure there was an actual drop. after i went over 2 mins to observe the drop.
i also disconnected the appliances and tested the pipework only,we are looking at about 3 metres of pipework run and i still found a drop in the pipework. tested all the joints and fittings with ldf but no leaks! though the pressure kept dropping.
has anyone come across such a situation, i will appreciate your inputs in this matter. Its baffled me and i hope you can help me on this matter.
thanks fellows.