price............ | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss price............ in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
S

secret squirrel

Today, I quoted for a basin mixer tap and waste replacement, the waste has a posh push pull thing at the rear of the mixer tap. It is a built in vanity unit and access is not going to be easy. I quoted £80 is this in the right ball park......

My theory is it should only take a couple of hours but I'm learning really fast my couple of hours and reality is longer.........

Your views would be welcome.........
 
I usually do the small jobs cheap hoping for the bigger jobs ie I change taps on basins and baths for £15 a tap.And normally fit a new overflow on bath as it invariably is brittle.

Today, I quoted for a basin mixer tap and waste replacement, the waste has a posh push pull thing at the rear of the mixer tap. It is a built in vanity unit and access is not going to be easy. I quoted £80 is this in the right ball park......

My theory is it should only take a couple of hours but I'm learning really fast my couple of hours and reality is longer.........

Your views would be welcome.........
About right if not supplying
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

  • Question
OK, I'm spotting a theme here :) Thanks...
Replies
4
Views
5K
D
Take the guys on here advice bud the most...
Replies
15
Views
1K
As a young man i installed a lot of one pipe...
Replies
25
Views
7K
S
  • Locked
No, £250 a day is nice!
Replies
6
Views
1K
Z
  • Locked
just a case of being neat some times you...
Replies
1
Views
1K
Back
Top