Problem with gas | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Problem with gas in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
D

Davetenant

Hello guys First post here, but have been browsing this gold mine of information for months. I am not really a plumber per say, although I have some experience. Anyway my boiler broke down a few months ago neater heat something or other it was an oldie. I took some time to get a few quotes for a replacement and the ''cheapest'' was an outrageous 1685.00!!!! for a baxi wall hung boiler.
So I decided to fit a new boiler myself, As far as I am aware, its legal to do so in your own home. I even managed to use they old flue hole, for the new flue as I am a crafty old fox. The supply for gas main that was already there was in 1/2" I think, so just used that jobs a good-un.
Anyway when ever the hob is on and the boiler comes on the flames on the hob die out nearly, I was reading that there may be a problem with my regulator on my meter it may need adjusting, whats the best possible way to go about this?
 
Welcome to the forum, I'm sure somebody can answer your question, but not me. How much of the fitting the boiler did you do yourself?
 
Unless you are Gas registered you won't get any advice here and I would seriously suggest you get someone who is qualified in.
 
Unfortunately for you the law states that it is illegal to install a gas appliance unless you are GSR, even in your own home. Get a professional in to sort out the problem.
 
You need a gsr in to look at your boiler. We cannot and will not give advice on the installation or repair of boilers for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.

Thank you.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html
 
Hello guys First post here, but have been browsing this gold mine of information for months. I am not really a plumber per say, although I have some experience. Anyway my boiler broke down a few months ago neater heat something or other it was an oldie. I took some time to get a few quotes for a replacement and the ''cheapest'' was an outrageous 1685.00!!!! for a baxi wall hung boiler.
So I decided to fit a new boiler myself, As far as I am aware, its legal to do so in your own home. I even managed to use they old flue hole, for the new flue as I am a crafty old fox. The supply for gas main that was already there was in 1/2" I think, so just used that jobs a good-un.
Anyway when ever the hob is on and the boiler comes on the flames on the hob die out nearly, I was reading that there may be a problem with my regulator on my meter it may need adjusting, whats the best possible way to go about this?

WTF dave you are a nut and i hope hse get ya
 
Status
Not open for further replies.

Similar plumbing topics

As you stated: The appliance is...
Replies
5
Views
817
Thank you for keeping me safe. If it is the...
Replies
2
Views
574
The date the inspection is let’s say 2 months...
Replies
13
Views
181
E
I reckon if I did a survey of 100 heating...
Replies
0
Views
466
eco-heating options
E
Back
Top