stings27
Gas Engineer
- Messages
- 59
Hi all. :smile5:
Got a phone call from a friend last night complaining that his boiler was making strange noises and would not turn off.
The boiler is only serving the rads as his HW is run off an Aga.
On arrival I first turned down the room stat which did nothing, then turned off on programmer, still the boiler kept running. The only way to turn it off was to isolate at the spur.
The strange thing was that the heating was luke warm at best, then there was a surge as water rattled in the EV , then you could not touch the first metre of pipework!
He told me that he had had the PCB replaced a few years ago and I think it is looking likely that it has blown again?
Any advice much appreciated.
Thank you :smile5:
Got a phone call from a friend last night complaining that his boiler was making strange noises and would not turn off.
The boiler is only serving the rads as his HW is run off an Aga.
On arrival I first turned down the room stat which did nothing, then turned off on programmer, still the boiler kept running. The only way to turn it off was to isolate at the spur.
The strange thing was that the heating was luke warm at best, then there was a surge as water rattled in the EV , then you could not touch the first metre of pipework!
He told me that he had had the PCB replaced a few years ago and I think it is looking likely that it has blown again?
Any advice much appreciated.
Thank you :smile5: