pumping hot and cold water supply's | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss pumping hot and cold water supply's in the Bathroom Advice area at Plumbers Forums

MZR

Plumbers Arms member
Plumber
Gas Engineer
Messages
226
Hi All,

just been asked by a customer who has a cottage round the corner from me if theres a pump on the market that will increase his hot and cold supply to the taps and showers ? the kitchen sink is on mains pressure which is all good the rest of the house is tank cold fed and the hot is on a cylinder vented, im thinking the cold water changing to the mains fed and pumping the hot what do you guys think all advise is welcome on this as im not 100%.

cheers all
 
Convert house to direct. Change cylinder and away to go.

No pumps to go wrong or electrical issues. And alot quieter

If there are any alterations in the future it will also be able to cope
 

Similar plumbing topics

  • Question
take iso valves off and fit 1/2 inch x 22mm...
Replies
5
Views
833
C
  • Question
Thanks for replying matey. You've been a...
Replies
3
Views
1K
  • Question
What type of cylinder do you have?
Replies
6
Views
1K
  • Question
A very rough calculation maybe using a UPS 3...
Replies
5
Views
917
Back
Top