Pumps to boost pressure for combi boiler flat? | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Pumps to boost pressure for combi boiler flat? in the Boilers area at Plumbers Forums

Messages
1
Hi, I live in a 4th floor flat, with 2 recently refurbished showers and a combi boiler. The pressure in the showers was poor, so after getting some reassurances that a gravity fed pump was still ok for my flat, I had a gravity fed salamander pump installed, but after a few weeks of it working, its now leaking. Does anyone have experience of the Salamander Homeboost or the Showerpowerbooster or others (both of which are apparently specifically for combi boilers.) Do they increase pressure well? Are they noisy? Thanks v much.
 
Home boost does a job but you’ll only get a maximum of 12lpm. Sounds like your installer hasn’t done there home work as a combi is never going to run two showers simultaneously
 
This subject comes up often. Inexperienced or lazy heating engineers will fit combis anywhere and everywhere because the cannot fit anything else or are not qualified to fit the appropriate system for a buildings real needs. BUT more crucially the building owners usually want 'value for money' brutally translated into cheap.
Then they get what they pay for.
Rob Foster aka centralheatking
 
With respect, on the fourth floor, you need a system that is properly designed.

The Combi issue is not beyond resolution, but it is not ideal.

In my view, if you want to keep the Combi, you will probably need a properly configured pumped accumulator.

Sadly there is unlikely to be a cheap fix for your problem
 

Similar plumbing topics

K
Is the set up you have now very poor or are...
Replies
5
Views
887
Pump/feed/expansion are piped/in wrong...
Replies
9
Views
1K
  • Question
Probably all off one main hence your problem...
Replies
3
Views
804
The Orion is about 65% efficient so not great...
Replies
10
Views
3K
Again, ongoing thanks. I'll have to get to my...
Replies
18
Views
2K
Back
Top