pushfit fittings hep2o | Plumbing Jobs | The Job-board | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

pushfit fittings hep2o

Post thread

Discuss pushfit fittings hep2o in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
U

Unregistered

Hi what do you use as a lubricant on hep2o fittings and where should it be applied.
thanks for your rsponses
dave
 
hep2o fittings have a small amount of lub on the rubber sealing ring inside so you don't need to lube them
 
If you do want to use Lube, Silicone Grease is the one But as has been said. They are pre lubed.
 
Status
Not open for further replies.

Similar plumbing topics

P
  • Question
hep2O piping to rads advice
Depending on what size/type your existing rad...
Replies
5
Views
962
Sparkgap
Sparkgap
A
copper vs pushfit pipes
Another vote for copper. All copper tube is...
Replies
2
Views
724
Chuck
C
SMB
  • Question
Kitchen tap, replacing the O rings on the spout.
Always used Regin Silicon Grease, WRAS...
Replies
1
Views
764
IND_Nick
I
S
  • Question
Faulty Hep2O fittings?
Take the good advice of your plumber and get...
Replies
6
Views
1K
Chuck
C
S
  • Question
Shower screen reinsert problem
As an update, what I did was: Applied a blob...
Replies
4
Views
733
Sandy283
S
Back
Top